12 m Floating Debris Collector

Technical Specifications
Project Background and Challenges
The vessel clears floating debris in rivers, lakes and reservoirs where water is shallow and bridge clearances are limited, requiring shallow draft, a small turning circle and controlled superstructure height. Manual collection is inefficient, so mechanised lifting and conveying is needed for continuous pick-up and onboard storage.
Our Solution
A flat-bottomed hull with 0.8 m draft suits shallow inland waters and bank operations. The bow carries a rotating collection wheel and conveyor: the wheel feeds debris onto the belt, which delivers it to the midship hold so collection continues while underway. The wheelhouse sits high at the aft-midship position with clear forward and side visibility for tracking debris lines and landing to unload. Structure follows small steel vessel rules, with local strengthening at the wheel and conveyor supports and drainage in the hold.
Delivery and Results
Concept design was completed: LOA 12 m, breadth 3.5 m, depth 1.2 m, draft 0.8 m, with rotating collection wheel and conveyor for continuous removal of weeds, branches and plastic waste in rivers, lakes and reservoirs.