102m Ro-Pax Ferry

Ro-RoDesign for submissionRINA Class
102m Ro-Pax Ferry

Technical Specifications

Technical Specifications
参数
数值
Length Overall
102.00 m
Length at Design Waterline
102.00 m
Length Between Perpendiculars
99.40 m
Moulded Breadth
17.60 m
Moulded Depth
6.00 m
Design Draft
4.20 m
Lane Metres
436 m
Passenger Capacity
542 P
Navigation Area
Tropical
01

Project Background and Challenges

A 102 m ro-pax ferry operating in tropical zones, combining 436 lane metres with 542 passengers while maintaining high turnaround efficiency. Hot, humid conditions raise demands on cabin ventilation, air-conditioning load and vehicle-deck ventilation, and the double-deck, double-bottom structure must balance vehicle-deck headroom with longitudinal strength.

02

Our Solution

The vessel adopts a steel hull with continuous double decks, double bottom, raked bow, fabricated stern post and bilge keels; the cargo area is single-side, double-bottom structure with three deckhouse tiers above the main deck. Cabins and public spaces sit on the upper decks while the vehicle deck runs fore-and-aft to speed up loading. Two marine diesel engines with gearboxes drive two fixed-pitch propellers in a twin-screw, twin-rudder aft-engine arrangement for manoeuvrability and redundancy, and vehicle-deck ventilation rates were increased for tropical conditions. Hull structure, outfitting, machinery and electrical systems were reviewed and surveyed by RINA.

03

Delivery and Results

Approval-stage design was completed for the 102 m ro-pax ferry: LOA 102.00 m, Lpp 99.40 m, breadth 17.60 m, depth 6.00 m, design draft 4.20 m, 436 lane metres and 542 passengers. General arrangement, structural, stability and hull specification documents were delivered to meet the capacity and safety requirements of tropical ro-pax service.

需要类似项目支持?

无论您处于新船研发、图纸送审或节能改造阶段,我们都可以提供针对性的技术支持。

联系我们