72m Ro-Pax Ferry

Ro-RoPlan designDesign for submission
72m Ro-Pax Ferry

Technical Specifications

Technical Specifications
参数
数值
Length Overall
72.23 m
Length at Design Waterline
65.00 m
Length Between Perpendiculars
62.96 m
Moulded Breadth
15.00 m
Moulded Depth
4.50 m
Design Draft
3.10 m
Navigation Area
Tropical coastal
01

Project Background and Challenges

The vessel is a ro-pax ferry for tropical coastal service, carrying vehicles and passengers between coastal ports. The owner required a 72 m platform that can be adapted to different routes, berths and lane arrangements while keeping short-sea turnaround efficiency.

02

Our Solution

A series-design approach was adopted. The general arrangement is based on a continuous single deck, double bottom, bulbous bow and twin-skeg stern; the vehicle deck is laid out by lane metres, and the passenger and crew areas are separated so cabin modules can be adapted in number and class. Propulsion uses two marine diesel engines with gearboxes driving two fixed-pitch propellers in a twin-screw, twin-rudder arrangement, balancing manoeuvrability and berthing efficiency. The cargo area is single-side, double-bottom structure with three deckhouse tiers above the main deck. Stability, freeboard and structural strength were checked against the applicable ro-pax rules.

03

Delivery and Results

The project produced a reusable 72 m ro-pax platform: LOA 72.23 m, breadth 15.00 m, depth 4.50 m and design draft 3.10 m, with a general arrangement plan, principal dimensions and hull specification delivered. Variants with different lane lengths and cabin configurations can be derived from the parent design, shortening later project cycles.

需要类似项目支持?

无论您处于新船研发、图纸送审或节能改造阶段,我们都可以提供针对性的技术支持。

联系我们